Diagnostics

After the installation, it is recommendable to check that the PC card  has been installed properly. This is done by performing a loopback test. The test is carried out from the Bluetooth Configuration Tool:

 

  1. Open the Microsoft Control panel.
  2. Double-click Bluetooth Configuration Tool. The Bluetooth Configuration Tool dialog box opens:

Bluetooth Neighborhood help0114 Diagnostics

  1. Click the tab Diagnostics. The following window opens:

Bluetooth Neighborhood help0115 Diagnostics

You can now perform a loopback test to check that the hardware is working properly:

  1. In Loop Mode, select either Single Loop (to test a single loop) or Infinite Loops (to test a number of loops). We recommend that you choose the latter (which is also the default setting).
  2. To start the test, click Run. When in the loop mode Infinite Loops, the test will run until you click Stop.
  3. In Loop Count you can see the number of loops tested. The number of Errors should always be: 0. If the test shows one or more errors, your hardware has probably not been installed correctly. We recommend that you:
    • Ensure that the PC card  is installed correctly.
      • Restart your computer.

Diagnostics